AquaNode

🔧

Local Calibration Available

Your device supports direct calibration with instant mV readings (no internet delay).

Open Local Calibration →

Make sure you're on the same WiFi network as the device.

Fast Data Mode

Enable for real-time mV readings during calibration. Auto-disables after 5 minutes.

Live Sensor Readings

pH -- mV

TDS -- mV

Turbidity -- mV

Temp --°C

--

🧪 pH Sensor (2-Point)

Not calibrated

1 First Reference Solution

Place sensor in your first pH buffer solution.

pH Value

Current mV

2 Second Reference Solution

Rinse sensor, then place in second pH buffer solution.

pH Value

Current mV

💧 TDS Sensor

Place sensor in a TDS calibration solution with known PPM value.

Known PPM

Current mV

Current K factor: --

🌊 Turbidity Sensor

Place sensor in clear, clean water to set the zero-point reference.

Current mV

Clear water mV: --

🌡️ Temperature Sensor

If readings are off, enter an offset to correct them.

Offset (°C)

Current Temp

Current offset: 0.0°C

Device Name

Device Features

Light Control

Leak Detection

Dimming Support

Notifications

Push Notifications

Status: Checking...

Calibration Mode

Enable Calibration

Allows instant data push (bypasses rate limiting). Auto-disables after 5 minutes.

Alert Thresholds

🌡️ Temp

- °C

🧪 pH

-

💧 TDS

- ppm

🌊 Turb

- NTU

AquaNode

Create Account

Reset Password

New Password

Message Title

Device

Add Device

Profile

Edit Profile

Trends

Light Control

Sensor Calibration

Local Calibration Available

Live Sensor Readings

🧪 pH Sensor (2-Point)

💧 TDS Sensor

🌊 Turbidity Sensor

🌡️ Temperature Sensor

Device Settings

Premium Feature